Angle Headsets

• To suit tapered forks • If you are running a 1 1/8" fork you will need to purchase the Works Components reducer crown. - this headset comes as standard with a crown race to suit tapered forks • Upper cup Stack height: 11mm - Total upper stack height...

• To suit tapered forks • Split type 7075-T6 aluminium crown race for simple, tool free installation • Upper cup Stack height: 11mm - Total upper stack height including bearing cover: 16mm • Lower cup Stack height: 2.5mm • Upper Bearing: 41mm OD, 45 x 45...

• To suit 1 1/8" forks • Upper cup Stack height: 11mm - Total upper stack height including bearing cover: 16mm • Lower cup Stack height: 3mm • Upper Bearing: 41mm OD, 45 x 45 Degree AC sealed bearing • Lower Bearing: 41mm OD, 45 x 45 Degree AC sealed...

• To suit Tapered steerer tube • Upper cup Stack height: 3mm - Total upper stack height including bearing cover: 8mm • Lower cup Stack height: 3mm • Upper Bearing: 41mm OD, 45 x 45 Degree AC sealed bearing • Lower Bearing: 52mm OD, 45 x 45 Degree AC...

• To suit 1 1/8" forks • Split type 7075-T6 aluminium crown race for simple, tool free installation • Upper Bearing: 41mm OD, 45 x 45 Degree AC sealed bearing • Lower Bearing: 41mm OD, 45 x 45 Degree AC sealed bearing • 'SHIS' standard headsets • Headset...

• Made in the USA of 7075 T-6 aluminum, internally contoured and relieved to minimize weight and maximize strength • Low-friction upper bearing seal completely seals cup from contaminants and is fully captured by the top cover • Steeper or Slacker +/-0...