Spoke Wrenches and Tools

• Updated to accept more types of wheelset with hub width up to 175 mm and accept max wheel hub width to 210 mm if use with upright extension TB-PF26. • Provides accurate measurement to check for accurate truing. • Measures wheels from 20" thru 29". •...

• Adaptor for truing wheel sets

• For removing hub end caps while servicing the hubs or converting them to different standards • Thanks to the expanding mechanism, which grabs the hub cap evenly from the inside, even the most stubborn hub end caps are easy to pull-off. Compared with...

• With the Velcro strap the tool can be mounted to any front fork and rear seat stay of the frame • The indicator is then used normally as on other truing stands. The tool can be also used for truing rotors • Light and small and easily fits in any...

• Professional wheel centering stand arm can get out of center after being used frequently. Controlling caliper arm enables us, to calibrate the stand arm back to its center position.

• Accepts wheels from 16 to 29 inch with or without tire • Supports hubs up to 157 mm width. Truing of 20 mm or other dimension axle wheels requires additional adaptors. • The calipers enable simultaneous radial control of the wheel position on both...

• Unior’s 1630/4DTPR is used for DT Swiss torx profile nipples. The ergonomic design makes work easy and efficient.

• Spoke wrenches are designed to tighten nipples with flat diameter 3.3 mm to 3.45 mm

• The smaller end is used for nipples with a 6.4mm outside diameter, while the larger end is used for assembling and disassembling for tubeless Mavic rim inserts.

• Threading nipples to the spokes is the most time consuming part of building wheels. Thanks to the speed nipple bit you can now do it with the cordless screwdriver, save yourself some time and still have all the nipples threaded on the spokes to the...

• Shimano Spoke wrench is used for nipples with dimensions 4.3 and 4.4 mm on Shimano® Wheel System