Rigging

Short Adjuster for 1/8" WireGenerally used at the stern rail in conjunction with the single gate eye to tension that section of the gate.Specifications:1/8" Wire1/4" Pin1" adj. Manufacturer : C. Sherman Johnson Manufacturer Part No : 26-406

"T" Style Toggle Jaw for 3/16" WireGenerally used at the stern rail when no gate is required with a turnbuckle forward. Manufacturer : C. Sherman Johnson Manufacturer Part No : 27-415

Double Threaded Interlocking Gate Eye for 1/8" WireA single eye is used on one end of the gate area and threaded into eye nut. Manufacturer : C. Sherman Johnson Manufacturer Part No : 26-408

Deck Toggle "T" Style for 1/8" WireThis fitting can be used wherever a cable needs to be terminated to a deck or bulkhead. Manufacturer : C. Sherman Johnson Manufacturer Part No : 26-415-1T

Double Threaded Interlocking Gate Eye for 3/16" WireA single eye is used on one end of the gate area and threaded into eye nut. Manufacturer : C. Sherman Johnson Manufacturer Part No : 27-408

Interlocking Swivel Gate Eye for 1/8" WireAn interlocking gate eye is used at the opposite end of the gate hook as a "hinge" for the gate. Manufacturer : C. Sherman Johnson Manufacturer Part No : 26-410

Single Threaded Gate Eye for 3/16" WireA single eye is used on one end of the gate area and threaded into eye nut. Manufacturer : C. Sherman Johnson Manufacturer Part No : 27-407

Pulpit Anchor for 1" RailThis fitting can be used on the stern rail and bow pulpit to terminated jaw fittings for lower or upper life lines. (1/2" hole). Hole will not accept cast gate hooks.  Manufacturer : C. Sherman Johnson Manufacturer Part No...

Short Adjuster for 3/16" WireGenerally used at the stern rail in conjunction with the single gate eye to tension that section of the gate.Specifications:3/16" Wire1/4" Pin1" adj. Manufacturer : C. Sherman Johnson Manufacturer Part No : 27-406 UPC :...

Eye to Jaw FittingThis fitting will convert a small bail at the stern rail to the standard gate eye to accept the over center gate hook. Manufacturer : C. Sherman Johnson Manufacturer Part No : LS-2500

Towable Genoa Car - Fits 25mm(1") T-TrackTowable genoa carsWith tow eye or sheave in place of plunger, allowing a control line to be lead aft so that genoa car adjustments can be made from the cockpit. Use in conjunction with end fittings shown...

Towable Genoa End & Becket - Fits 25mm(1") T-TrackLength:88mmWidth:37mmHeight:50mmSheave Diameter:35mmMax Rope Diameter:8mmBreak Load:N/ASafe Working Load:N/AWeight:121gA popular range of genoa cars and sliders designed to run on 25mm (1") 'T' track. All...