Camber Kits

Replace bent, damaged, or lost factory guide pins with these heavy duty knurled pins from SPC and your slotted cam will work like it should again. Every tech needs to have these easy to use pins on the shelf for when a GM 1500, 2500, or Colorado rolls on...

Replace bent, damaged, or lost factory guide pins with these heavy duty knurled pins from SPC and your slotted cam will work like it should again. Every tech needs to have these easy to use pins on the shelf for when a GM 1500, 2500, or Colorado rolls on...

Some users find that once they remove the plastic retainer from the original equipment cam on GM trucks, they can't get adjustment to hold. These lock plates are designed to provide a mechanical lock for the cam bolt to the guide pin. Simply dial in your...

This lock plate is designed to keep the front alignment angles in position by replacing the existing slotted cam. For newer models of GMC's 1500, 2500 and 3500 vehicles.Installation Instructions

This heavy duty cam-bolt kit was specifically designed for the extreme Raptor & F-150 user. Whether you are a energetic Raptor driver or abuse your F-150 in the fields and on the job site, you may have found that the OE bolts slip or that a single cam...

The innovative cam nut and sturdy bracket saves time and money. Easily adjust camber and caster on newer F150s and Expeditions. Save time since you don't have to remove the OE bolt or stabilizer bar. The sturdy guide bracket allows for live adjustment...

Adjust rear camber on many non-adjustable Ford and Lincoln models with SPC's pantented EZ cam bolt. Simply replace the rear upper control arm to knuckle bolt with SPC's bolt and get ¦0.75¦ of camber adjustment to bring your vehicle back into...

Use this kit to replace stripped or bent OE alignment cam assemblies on the Mazda Miata MX-5. SPC's cams are heat treated to prevent stripping or warping. This kit is available per wheel and allows full use of the ± 2° factory adjustment range for...

To correct camber remove the O.E. lower control arm attaching bolt and move arm away from the bracket. Using 73010 Punch, enlarge the hole in the bracket and re-attach the lower control arm using the correct mm bolt. To adjust, rotate the cam bolt. Note:...

These cams replace the front axle bolts to provide caster and pinion angle (up to 3 degree total change). To elongate the OEM bolt holes use our knock out punch - # 74910. Front caster will change as you agjust pinion angle. Use our offset pin joints...

Dodge solid front axled 3/4- and 1-ton trucks equipped with non-adjustable or corroded lower control arm bolts can now replace their OEM bolts (50mm cams) with the 82385 Caster Adjustment Kit (pair). These replacement cam bolts provide caster and...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.Installation InstructionsThis Part Fits:YearMakeModelSubmodel1994-1996DodgeRam 1500Base1997-1999DodgeRam 1500Laramie1997DodgeRam...