Raceface

• Compatible with SRAM cranksets with a removable Spider • Narrow Wide tooth profiling ensures ultimate chain retention • 7075-T6 aluminum, aerospace grade strength • Stiff 4mm plate thickness to...

• Cold drawn, seamless 2014 aluminum construction • Designed to handle all-around trail riding at XC weight and an attractive price point • Shot peened for increased fatigue life • 35mm optimized...

• Manufactured from 2014 Aluminium • 35 optimized profile design • Extra control with 780mm width • Stealth black on black decals to match every frame color

• Forged and machined from 6061 aluminum • Interlocking 4-bolt bar clamp secures your bar and distributes loads away from bolts and into the body • Enduro rated strength • 39mm stack height • 160g...

• Forged 7050 AL gives this crank phenomenal strength, earning it an Enduro rating at light weight • E-bike crankset • Impressive strength to weight ratio • Black satin finish • CINCH direct mount...

• The Aeffect R 1X Seatpost Lever delivers big time hassle-free height control. • Designed to illuminate any excess bells and whistles that might fail, this lever gets the job done so you can focus...

• Open-back design for easy install and removal. • Featuring D3O® T5 Evo X certified impact absorbing foam. • Perforated neoprene enhances venting and moisture control. • Foam padded side walls offer...

• Offset nipple bed for improved spoke tension balance and wheel strength/stiffness • Tubeless ready, strong tire retention bead • 6069 Alloy

• Redesigned for 2022 • Wider, thinner and more durable than previous generation • 10 adjustable bottom-loading pins • Fully serviceable without custom tooling • 6061 alloy • 20x pins/pedal • 110mm x...

• Very strong, very stiff • DH, Freeride, Enduro, Dirt-jump strength • 7075 alloy • CINCH direct mount • Boost 136 spindle

• Very strong, very stiff • DH, Freeride, Enduro, Dirt-jump strength • 7075 alloy • CINCH direct mount • 183mm DH spindle • • • For 83mm bottom bracket frames

• Extend the life of your Atlas pedals • Bearing rebuild kit • For current generation Atlas pedals (PD22ATLAS***)

• Forged and blasted 2014 aluminum for high strength and fatigue resistance • 4-bolt bar clamp • Interlocking U-Shaped clamp geometry transfers more load through stem body and not the bolts •...

• Forged and machined from 6061 aluminum • Interlocking 4-bolt bar clamp secures your bar and distributes loads away from bolts and into the body • 42mm stack height

• For use in standard Mtb shell width (73mm) • Custom 19 ball flanged retainer bearings • Allow the use of a 30mm spindles • Bearings races are fully coated for improved corrosion resistance •...

• Standard 6806 retainer bearings • Bearings are factory filled with Phil wood grease • Cups are machined for a high tolerance frame fit • Installs with BSA30 standard tools

• For use with DH width (83mm) cranksets • Standard 6806 retainer bearings • Bearings are external to the BB shell resulting in a stiffer widerstance • Bearings are factory filled with Phil wood...

• Narrow Wide tooth profiling ensures ultimate chain retention • Attaches as part of the RF Cinch system (using common Park BBT-22 bottom bracket tool) - allowing to switch between DM rings/spiders...

• Cinch Direct Mount compatibility with the Shimano 12 speed MTB chain. • 7075-T6 aluminum, aerospace grade strength. • Stiff 4mm plate thickness to transfer loads without flexing. • Narrow Wide...

• Narrow Wide tooth profiling ensures ultimate chain retention • Attaches as part of the RF Cinch system (using common Park BBT-22 bottom bracket tool) - allowing to switch between DM rings/spiders...

• Optimized Pedal Stroke • 1x Drivetrain Variable Width Tooth Profile Stops Dropped Chains • Super Boost Compatible • 10//11/12 Speed Compatible • Wear resistant 7075 Aluminium • Compatible with all...

• Full PU liner and foam insulation blocks wind and cold. • DWR coating provides extra water repellancy. • Waterproof cuff features velcro adjustment for best fit. • Faux leather palm for durability...

• Pedal end boots protect crank arms • Wrap it up and protect the tips! • Fits: Next/Next SL/Next SL Cinch

• The strongest, stiffest and most durable carbon crankever created by Race Face • Stainless steel wear plate guards against the damage caused by footwear friction while adding additional impact...

• Single lock on collar • Low profile • Proprietary rubber compound

• A directional ramped grip profile under the fingers helps to eliminate slippage • Proprietary rubber compound • Grip material extends over the dual lock on collars

• Single lock on grip • Super slim low profile design • Lightweight • Uses Raceface's soft and durable super tacky VEXY • Raceface MX style half waffle for added grip security compound • Topographic...

• Removable D3O® T4 Trio foam pad provides impact protection. • Mesh sleeve fabric for breathability and comfort. • Silicone gripper plus hook and loop strap closure fora secure fit. •...

• Adjustable hook and loop strap closure around the calf and silicone gripper on the upper thigh provide a secure fit. • Removable D3O® LP1 foam pad provides certified impact protection. • Lycra...

• Double Lock-On grip to stay secure • Super slim and low profile design with directional shape • Directional design features contoured palm area with moisturedissipating channels • Durable, yet...

• Narrow Wide tooth profiling ensures ultimate chain retention • Stiff 4mm plate thickness and I-beam construction transfer loads without flexing • 7075-T6 aluminum, aerospace grade strength •...

• Narrow Wide tooth profiling ensures ultimate chain retention • Stiff 4mm plate thickness and I-beam construction transfer loads without flexing • 7075-T6 aluminum, aerospace grade strength •...

• Narrow Wide tooth profiling ensures ultimate chain retention • Stiff 4mm plate thickness and I-beam construction transfer loads without flexing • 7075-T6 aluminum, aerospace grade strength •...

• Angled clamp bolts allow easy tool access for hassle free adjustment and tightening • 6deg ? and 12deg ? saddle adjustment range • Wide lower cradle gives extra rail support for lightweight saddle...

• Enduro rated, XC weight • Manufactured from UD Carbon with matte clearcoat. • Hand made in Canada • Reinforced pedal Insert • Burlier 7050 Spindle • 136mm Spindle width for improved clearance on...

• Manufactured from UD Carbon with matte clearcoat. • Carbon optimized flex for improved small bump compliance. • 35mm bar diameter for incredible strength/weight ratio

• One of the lightest cranksets in the world • 136mm spindle provides ample chainstay clearance and functionality • XC and trail rated • Precise power transfer • Crank boot included • 428g (170mm...

• To use 24mm spindle cranksets in 46mm OD (PF30) BB shells • Standard 6806 retainer bearings • Bearings are external to the BB shell resulting in a stiffer widerstance • Bearings are factory filled...

• Tough nylon composite pedal body with added traction treads. • Slim, lightweight platform with a concave shape. • 18 Molded pins per pedal add grip without risking your shins or shoes. • Durable...

• Two bolt design for easy adjustment while holding rails securely • Low profile clamps reduce stress on light-weight rails • The 3D forged 6061 heat-treated aluminum tube is anodized and shot peened...