RAM Mounting Systems

RAM 14" Long Extension Pole with 2 1" Diameter Ball Ends, and Double Socket ArmThe RAP-BB-230-14-201U consists of a SHORT extension pole with (2 qty) 1" diameter ball ends and double socket arm...

RAM 12.75" Long Extension Pole with 2 1" Diameter Ball EndsThe RAP-BB-230-14U consists of a SHORT extension pole with (2 qty) 1" diameter ball ends. The ball ends are compatible with all 1" ball...

RAM-ROD Combination Bulkhead/Flat Surface Base with Plunger for Spline PostsThe combination bulkhead/flat surface mounting base can be installed on a flat surface such as the deck or on a vertical...

RAM Mount 1.5 Inch Ball Double Socket Arm with 2.5 Inch Round BaseThe RAM Mount RAM-103U mount, with standard arm, consists of the 1.5" diameter ball and socket system with one open socket end. This...

RAM Mount 1.5 Inch Ball Short Arm with 2.5 Inch Round BaseThe RAM Mount RAM-103U-B mount, with short arm, consists of the 1.5" diameter ball and socket system with one open socket end. This mount is...

RAM 6.25" x 2" Universal Electronics Base with 1.5" BallThe RAM-111BU consists of a 1.5" diameter rubber ball connected at right angles to a flat 6.25 x 2" rectangular plate. The plate contains...

RAM 1.5" Rail Mount with Double U-Bolt Base & 3.625" Square Base (VESA 75mm X 75mm Hole Pattern)The RAM-334-1U consists of a double socket arm, 3.625" square base with the VESA hole pattern and...

RAM Spotlight Base w/3/8"-16 PostThe RAM-236U consists of a 1.5" diameter rubber ball, connected to a 3/8"-16 thread. Material: Powder Coated Marine Grade Aluminum Ball Size:1.5" Rubber Ball Size...

RAM 1.5" Diameter Ball Mount with Long Double Socket Arm & 2 2.5" Round Bases w/AMPs Hole PatternThe RAM-101U-D consists of a long double socket arm and two 2.5" diameter round bases with the...

RAM 1" x 2" Rectangle Base with 1.5" BallThe RAM-202U-12 consists of a 1.5" diameter rubber ball connected at right angles to a 1" x 2" rectangular base. This mount has pre-drilled holes at each...

RAM 1.5" x 2.5" Rectangle Base with 1.5" BallThe RAM-202U-1525 consists of a 1.5" diameter rubber ball connected at right angles to a 1.5" x 2.5" rectangular base. This mount has pre-drilled holes at...

RAM Adapt-a-Post 11" Extension PoleVersatility. That one word sums up what you get when you purchase RAM products. For Kayaks, versatility is key since space is always at a premium. Whether it's to...

RAM Adapt-A-Post 9" Extension PoleVersatility. That one word sums up what you get when you purchase RAM products. For Kayaks, versatility is key since space is always at a premium. Whether it's to...

RAM 2" x 2" Square Base with 1.5" BallThe RAM-202U-22 contains a 1.5" diameter rubber ball connected at right angles to a 2" x 2" square base. This mount has pre-drilled holes at each corner of the...

RAM 2" x 4" Rectangle Base with 1.5" BallThe RAM-202U-24 consists of a 1.5" diameter rubber ball connected at right angles to a 2" x 4" rectangular base. This mount has pre-drilled holes at each...

Description:The RAP-201U, standard double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball...

Description:The RAP-201U-B, short double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball...

The RAP-202U-225 consists of a 1.5" diameter rubber ball connected at right angles to a 2" x 2.5" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material:High...

The RAP-111U consists of a 2" x 1.7" 2" x 1.7" square base that contains the universal AMPs hole pattern, STANDARD LENGTH double socket arm and 6.25" x 2" rectangle base. The rectangle base contains...

RAM Transducer Arm Mount with 18" Rigid Aluminum Rod and Open Single Socket: Compatible with all RAM 1" Ball BasesKayak fishing is all about adaptability. RAM Mount offers the widest selection of...

The RAP-111BU consists of a 1.5" diameter rubber ball connected at right angles to a flat 6.25 x 2" rectangular plate. The plate contains different combinations of pre-drilled holes which will match...

RAM Short Double Socket Arm for 1" Ball BasesThe RAM-B-201U-A, short double socket arm, has a socket at both ends that accommodates 1" ball bases. RAM socket technology allows for almost infinite...

Steel Adhesive Plate Adapter for Magnetic Mounts This round steel adhesive plate is an ideal solution for enabling any RAM® magnetic base – eliminating the need to drill into a...

Spine Clip Holder with Ball for Garmin Handheld Devices With the Garmin spine mount adapter, make any Garmin handheld device featuring an integrated spine connection RAM® Compatible™...

Tough-Claw Mount w/Universal X-Grip Phone HolderThe RAM-HOL-UN7-400U consists of the small Tough-Claw base and universal X-Grip holder. The X-Grip holder has a clean and clever four leg design that...

Universal X-Grip Holder f/12" TabletsThe new RAM X-Grip line of products just got bigger and better. This new model is just what you've been looking for to hold your favorite tablet. Just like the...

Leash Plug Adapter w/1.5" Diameter BallThe 1.5" diameter ball leash plug adapter will attach to most SUP/surfboards, as well as after-market plugs. With the simple twist of the base, quickly secure...

Tough-Ball™ with 1/4"-20 x .50" Threaded Stud The RAP-B-379U-252050 consists of a 1" diameter rubber ball, connected to a 1/4"-20 X .50" male threaded post. The male thread matches most...

Square Post Clamp Base 4" Wide with 1.5" BallThe RAM-247U-4 is a clamp base with 1.5" rubber ball that will connect to rails up to 4" maximum in width. Features:Material: Powder Coated Marine...

Square Post Clamp Base 2.5" Wide with 1.5" BallThe RAM-247U-25 consists of a 2.5" clamp base with 1.5" ball. Features:Material: Powder Coated Marine Grade AluminumBall Size: C Size 1.5" Rubber...

EZ-Roll'r™ Cradle with Ball for Apple iPad mini 1-3The RAM-B-202-AP14U consists of a 2.5" round base adapter, with 1" ball, attached to a high strength composite cradle. The cradle includes a...

Low Profile Composite Double Socket ArmThe RAP-B-201U, composite standard double socket arm, has a socket at both ends that accommodates 1" ball bases. A single spring inside the arm opens the end...

Twist-Lock Triple Suction Cup Ball BaseThe RAP-B-365-224-1U, triple suction cup base, consists of a 1" ball base connected to a high strength composite base with three 3.3" diameter suction cup bases...

Tough-Track™ Overall Length - 7"With the RAM Tough-Track, flat surface mounting possibilities are nearly endless for ATVs, cars, combines, motorboats, tractors, trucks, and more. This track...

The RAM® Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round and square bars and rails. The Tough-Claw™ can be clamped on rails...

The RAM® Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round and square bars and rails. The Tough-Claw™ can be clamped on rails from...

RAM 1.5" Diameter Ball Mount with Short Double Socket Arm, 2.5" Round Base (AMPs Hole Pattern) & 3.625" Square Base (VESA 75mm X 75mm Hole Pattern)The RAM-101U-B-2461 consists of a SHORT double...

1.5" Diameter Ball Mount with Long Double Socket Arm, 2.5" Round Base (AMPs Hole Pattern) & 3.625" Square Base (VESA 75mm X 75mm Hole Pattern)The RAM-101U-D-2461 consists of a LONG double socket arm,...

The RAM-D-201U-C, short double socket arm, has a socket at both ends that accommodates 2.25" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and...

RAM Tab-Tite Universal Clamping Cradle f/Apple iPad w/LifeProof & Lifedge CasesThe RAM-HOL-TAB17U consists of a spring loaded back plate and custom support cups for 10" screen tablets WITH heavy duty...