REESE

Trunnion Bar; 1200 Pound Tongue Weight; 12000 Pound Gross Trailer Weight; Without Shank; Without Hitch Ball

14-16K 20K 5TH WHL LEGS

With Head/ Head Support/ 15 To 18 Inch Adjustable Height Base Assembly/ Handle Kit; 16000 Pound Weight Carrying Capacity; Round Tube Slider; Dual Pivot Head;Without Rails And Installation Kit. Please...

For Elite Series Under-Bed Gooseneck Hitches; 2-5/16 Inch; 30000 Pound Capacity

Replacement Safety Pin for Reese and Draw Tite Systems Newer than 8-2006

For Use With GM Factory Installed Rail System; With 2-5/6 Inch 30000 Pound Capacity Ball/ Ball Storage Bag/ 2 Safety Chain Attachments/ Hole Cover

Center Section For M5 Series 20000 Pound Hitch Kit

With Head/ Head Support/ 13 To 17 Inch Adjustable Height Base Assembly/ Handle Kit; 20000 Pound Weight Carrying Capacity; Fixed; Dual Pivot Head; Includes 10 Bolt Rails; Requires Installation Kit...

Use To Stop Kin Ping Pivot Of Sidewinder When Used With 20K Fifth Wheel Hitches

Use To Stop Kin Ping Pivot Of Sidewinder When Used With Curt Fifth Wheel Hitches

Center Section For M5 Series 27000 Pound Hitch Kit

Replacement Installation Hardware for 30035/ 30153/ 58058 (10 - Bolt Design) Includes Ten Carriage Bolt 1/2 Inch-13 x 2 Inch GR8/ Ten Hex Nut 1/2 Inch-13 GR5 and Ten Block 5/16 Inch x 1 Inch x 2 Inch

Utilizes Elite Fifth Wheel Rail Kits; 30000 Pound Weight Carrying Capacity; In-Bed; 2-5/16 Inch Forged Ball

10 Bolt Base Rail and Brackets; Bolt-On; Drilling Required; Includes Part No- 50066 and 58058

10 Bolt Base Rail and Brackets; Bolt-On; Drilling Required; Includes Part No- 50066 and 58058

Replacement Head For Reese 16K Hitches

Bracket; Drilling Required; Use With 30035 and 30095

For Use With Elite Series 5th Wheel Hitch; Rail Kit; Bolt-On; Under Bed Mount; Drilling Required

Frame Bracket; Requires Rails For Installation; No Drilling Required

Helps Prevent Theft Of Fifth Wheel And Unwanted Removal Of Pull Pins; Lock Not Included; Set of 4

2 Brackets; Bolt-On; Drilling Required; Includes Hardware; Requires Rail Kit

2 Brackets; Bolt-On Bracket; Drilling Required To Mount Rails; Includes Hardware; Requires Rail Kit

Fifth Wheel Landing Gear; 8000 Pound Lift/ Support Capacity; 36 Inch Total Lift X 18 Inch Screw Travel; 8 Inch Length X 6 Inch Width Footplate; 9 Inch Per Minute Lifting Speed; With Motors...

Fits 15K 16K and 20K Series; 10 Inch Travel; Provide Additional Turning Clearance and to Prevent Damage to Truck When Spotting Trailer; Without Hitch Head; Requires Mounting Rails/ See Required Parts

With Head/ Head Support/ 15 To 18 Inch Adjustable Height Base Assembly/ Handle Kit; 16000 Pound Weight Carrying Capacity; Square Tube Slider; Dual Pivot Head; Without Mounting Rails and Brackets

Rail Upgrade Kit; Requires Rails For Installation; Drilling Required

2 Brackets; Bolt-On; Drilling Required; Includes Hardware; Requires Rail Kit

Replacement Brackets and Hardware For Reese 30035 and 58058

4 Brackets; Bolt-On; Drilling Required; Includes Hardware

Vehicle End; 7 Way Blade; Without Lead Wire; Single

7-Way Blade to 4-Flat; Single; 7.5 Amps Per Circuit; Single

4 Flat to 7-Way Blade; Single

Adapter Brackets; Drilling Required; Use With 30035

7-Way Blade to 4 Flat; With Dust Cover; Illuminated

Rail Adapter Bracket; For Use With 30035 Rail Kit; Bolt-On; Drilling Required

Replacement Trunnion Bar Head Assembly; Without Shank

Use To Stop Kin Ping Pivot Of Sidewinder And Airborne/Sidewinder Pin Boxes When Used With B&W Fifth Wheel Hitches

Class V; Fits 2-1/2 Inch Receiver; 13000 Pound Gross Trailer Weight/ 1300 Pound Tongue Weight; 5 Inch Drop/ 3-1/2 Inch Rise; Non-Swivel; Non-Extendable; 10 Inch Shank; 1-1/4 Inch Diameter Ball Hole;...

Class V; Fits 2-1/2 Inch Receiver; 13000 Pound Gross Trailer Weight/ 1300 Pound Tongue Weight; 7-3/4 Inch Drop; Non-Swivel; Non-Extendable; 10-1/2 Inch Shank; 1-1/4 Inch Diameter Ball Hole; Without...

Replacement Trunnion Spring Bar; 1200 Pound Tongue Weight; Single Replacement Bar