Unior

• A must have wheel building tool. Rotating handle and the guide shape enables you to quickly screw the nipple onto the spoke. It supports standard shape nipples.

• Used to remove and install Shimano® Hollowtech II, Campagnolo® Ultra-Torque and Power Torque, Race Face®, FSA®, SRAM®, Truvativ®, Chris King® bottom brackets as well as many and others. The...

• Substitute for pedals while adjusting derailleurs on a bicycle without pedal • Includes two adaptors: threaded version for more efficient work and a conical version for quick checks • Threaded part...

• Precise design and hardened to stay sharp. 1695.1 is used to restore existing pedal threads and is available in set (left and right).

• Pedal thread inserts are used to replace damaged threads in cranks

• The conically shaped tip of the tool is designed to slide between the pads inside the caliper and spread the pads by pushing pistons back into the caliper. • Tool is bent 30° for easier access to...

• With the Velcro strap the tool can be mounted to any front fork and rear seat stay of the frame • The indicator is then used normally as on other truing stands. The tool can be also used for truing...

• Supports hubs up to 157 mm width • 2.3kg • Center wheels with dimension from 16 to 29 inch, with or without tire

• The simple tightening of the spindle fits the chain pin with perfect precision and with its ergonomic design it is easy to use.

• Quickly and accurately determine the wear and stretch of any chain

• Set includes all the most common tools to service your bike stored in a compact plastic toolbox inside two high quality foam trays, where each tool finds its place • Three-legged hex and torx...

• Well thought out, extremely durable tool pallets organize and hold your tools in place. Pockets are designed with the size of our tools in mind. It also features a few extra pockets leaving you...

• The toolbox is designed especially for bike tools; it’s made of heavy duty plastic and is waterproof and dustproof. • Features a hangout pallet that hooks to the holes on the front side of the...

• Two 15 mm openings set at offset angles to easily remove pedals regardless of the pedal axle position

• Repair bike stand with two clamps is designed for service workshops and more demanding users. • Does not include base plate • Stand is adjustable by height between 947 and 1570mm • Replaceable...

• Repair bike stand is designed for service workshops and everyday use. • Stand is adjustable by height between 947 and 1570mm • Replaceable rubber jaw covers, item 1693.11

• Quick release system enables the mechanic to close the jaws by hand, at which point clamp already grips the seat post or frame with sufficient force to hold the bicycle in place. Rotate the handle...

• Designed to fit any 1/2" drive socket • Pro Socket Handle offers enough length (250mm tip-to-tail) for good leverage while still being compact enough to carry with you in your tool roll or tool...

• The spoke wrench is designed to tighten nipples with flat diameters of 3.3mm

• Strong Velcro strips for a secure closure, keeping your tools where you want them • Elastic straps for fitting odd sized tools • Extra small pockets along the side for small part storage like...

• Long ball end hexagon wrench, sizes 1.5, 2, 2.5, 3, 4, 5, 6, 8 mm • TX profile wrench, size T25 • Crank cap tool • Chain tool • Round spoke wrench • Set of two tire levers • Crosstip screwdriver...

• Accepts wheels from 16 to 29 inch with or without tire • Supports hubs up to 157 mm width. Truing of 20 mm or other dimension axle wheels requires additional adaptors. • The calipers enable...

• Freshen things up a bit by replacing those worn out covers

• Brake caliper is used on the 1689 professional wheel centering stand.

• Fits the popular spoke nipple flat sizes: 3.3 mm, 3.45 mm, 3.7 mm, 3.96 mm, 4.4 mm and 5mm

• Designed to cut tire treads and was developed specifically for MTB tires • Height adjustment slider, which enables cutting of each tread on the same height and therefore making the custom tire the...

• Shimano Spoke wrench is used for nipples with dimensions 4.3 and 4.4 mm on Shimano® Wheel System

• Used for removing old bushings from the rear shock • Supports bushings removal with diameter 12mm to 12.7mm

• Threading nipples to the spokes is the most time consuming part of building wheels. Thanks to the speed nipple bit you can now do it with the cordless screwdriver, save yourself some time and still...

• Spoke wrenches are designed to tighten nipples with flat diameter 3.3 mm to 3.45 mm

• For dimensions: 1", 1-1/4", 1-1/8", 1-1/2" • Enables fast and precise determination of steering tube length desired after the cut

• Bushing extractor set sizes 12 mm and 12.7 mm • Fork seal driver tool for fork sliders sizes 30, 32, 34, 35/36 and 40 mm • Hex wrenches sizes 3/64", 1/16", 1.5, 2, 2.5 and 3 • 1/2" sockets sizes...

• Used for servicing bicycle suspension • Grab any kind of smooth and sensitive surface, like shock or fork sliders

• Material: premium chrome vanadium steel

• Blade chrome plated, black anodised tip • Handle – polypropylene

• Used to remove cranks with damaged inner threads when the crank cannot be removed with a normal crank puller

• Set of 2 taps ITAL 36 ? 24 TPI

• Steel plates welded on to the jaws to help massage the tire into place • Also for fast straightforward tire removal - especially tires that have already bonded with the rim • Shape of the pliers...

• Fits with all the Unior stands • Consists out of a strong thin metal plate with two rails and and stylish SOS foam tray

• Long ball end hexagon wrench, sizes 1.5, 2, 2.5, 3, 4, 5, 6, 8 mm • TX profile wrench, size T25 • Crank cap tool • Chain tool, together with tire valve tool • Round spoke wrench • Set of two tire...