Unior

• The wrench is the basic working tool for cyclists extended tours. • Material: premium flex plus carbon steel. Surface finish: blacken to standard DIN 50938

• Material: premium flex plus carbon steel • The 2.3 and 2.8 mm pins are interchangeable, the distance between them is adjustable. The biggest difference between the pins is 50 mm open and 10 mm...

• Awl with round straight blade • Awl with round, 90° bent blade • Awl with round, double bent blade • Awl with round, double bent small blade

• Adaptor for truing wheel sets

• The vice features two different diameter receptacles of 9 mm and 10 mm for inserting front or rear axles. Fits into jaws of engineers vice. The axle vice is easy to use. Two inserted springs will...

• Set contains: Reamer’s magnetic handle 1695.1/4BI or 1695.1/4BIUS, Reamer body 1699.2/4, Reamer 1699.1, Reamer frame guide BSA 1699.4BSA with tool 1699.5/4P

• For fixing bottom bracket threads on the frame or removes excess paint or dirt from threads • BSA standard - left & right thread tap 1.3/8 ? 24 TPI • Includes: Reamer’s magnetic handle 1695.1/4BI...

• The wrench is used to remove and install Shimano® Hollowtech II, Campagnolo® Ultra-Torque and Power Torque, Race Face®, FSA®, SRAM®, Truvativ®, Chris King® bottom brackets • Small wrench is...

• This tool is made for the installation and removal of XTR ® and Dura Ace bottom brackets and enables easy work without slippage and damage • Material: premium plus carbon steel, Surface finish:...

• The Bearing Service Tray combines our bearing puller and bearing press kits into a well-organized all-in-one tray. • Installation kit includes spindle with two threaded handles, adaptors for...

• The bike repair stand is the basic working tool both for service workshops and cycling enthusiasts • Maximum load capacity is 30kg • Weight of the stand without tool tray is 5.7kg

• The bike repair stand is the basic working tool both for service workshops and cycling enthusiasts • Maximum load capacity is 30kg • Weight of the stand without tool tray is 5.7kg • The stand...

• Widely adjustable jaws • The base can be mounted directly to a work bench or a wall • Comes in manual adjustable, quick release or auto adjustable options

• Precision CNC machined • 1/2? square drive makes it easy to use with torque wrenches, ratchets and fixed handles

• Precision CNC machined • 1/2? square drive makes it easy to use with torque wrenches, ratchets and fixed handles

• Precision CNC machined • 1/2? square drive makes it easy to use with torque wrenches, ratchets and fixed handles

• Precision CNC machined • 1/2? square drive makes it easy to use with torque wrenches, ratchets and fixed handles

• Precision CNC machined • 1/2? square drive makes it easy to use with torque wrenches, ratchets and fixed handles

• Pliers developed specially for cutting shift and break housing. Pliers cut precise and smooth without deformation to the cable housing and feature a build in crimping function for cable end caps. •...

• Used for holding brake and derailleur steel cables and pulling them out of the housing • The safety lock is activated with a thumb push. The lock is automatically released by squeezing handles...

• Works to both remove and install bearings on your Campy or Fulcrum Ultra Torque cranksets • Included with the 1626/2 bearing puller is a bearing install tool. It's a simple plastic press used in...

• The freewheel remover is used for removing an assembling Campagnolo® freewheels. • Use the freewheel remover together with the Unior 1/2" ratchet 190.1ABI

• These 12" blades are compatible with the Unior hacksaw frame and come in a pack of 2 • Much safer for cutting carbon as it leads to fewer loose strands and leaves a cleaner result

• For: Shimano®, ISIS® • Material: premium flex plus carbon steel

• The double threaded screw enables you to use this tool for Shimano standard bottom brackets as well as for Shimano Octalink and Truvativ bottom brackets.

• Wrench for rear sprocket with handle is used for Shimano®, SRAM®, Sun Race®, Suntour® and other cassette sprockets

• Used to remove and install cassette on hubs with 12 mm through axle.

• Modern replacement of the traditional chain whip • Pins on the tool engage with the smallest sprocket on the cassette and hold it in place, while the opening in the middle allows for easy access to...

• Compatible with our Professional Chain Tool and the new Master Chain Tool

• Works on all chains from 5 to 11 speeds

• Measurement: from 0 to 0,6% - no chain wear. from 0,7 to 1,2% the chain is worn out and it is necessary to replace it.

• Double-dipped, ergonomically shaped handle for more comfort • -01 is compatible with cassettes from 6-12 speed, including SRAM X-Range • -02 compatible with 1/2x1/8 single speed chains

• For unscrewing and tightening of front chain ring nuts • The dimension of the hexagonal key opening is SW10 • Material: premium flex plus carbon steel

• This tool is used for repairing minor damage on the front chain rings. The narrow opening is intended for truing a tooth, the broader for truing the crank spider. • Material: premium flex plus...

• Material: premium plus carbon steel, drop forged, entirely hardened and tempered, cutting edges induction hardened

• The single sided cone wrench has a remarkable toughness, hardness, durability and tight fit. • Material: premium flex plus carbon steel, surface finish: chrome plated according to ISO 1456:2009

• The tool features an 8mm hex in the middle of it for those really stuck caps

• The crank puller is used for removing Shimano Octalink and ISIS cranks as well as for standard square spindle cranks.

• Crank Saver - Pedal thread repair and insert kit • Includes: left and right reaming tap 5/8??24 TPI, 10 pedal thread inserts for left crank arm, 10 pedal thread inserts for right crank arm, metal...

• Tools and POP to create a branded area in store • Multitool EURO6 (3pcs), Multitool EURO7 (2pcs), Multitool EURO13 (3pcs), Multitool EURO17 (2pcs) • Y torx wrench (3pcs), Y hex wrench (3pcs), Set...